To study meiosis in plants, the best part would be:
पौधों में अर्धसूत्रीविभाजन (meiosis) का अध्ययन करने के लिए, सबसे अच्छा भाग होगा:
✅ Correct Answer: (C)
To study meiosis in plants, the best part would be anthers.
In this, the pollen grain is formed after the meiosis which is actually an immature male
gametophyte.
Stamens are the male reproductive part of the flower and carpels act as the female
reproductive part producing the egg.
पौधों में अर्धसूत्रीविभाजन (meiosis) का अध्ययन करने के लिए सबसे अच्छा भाग परागकोश (anthers)
होगा।
इसमें, अर्धसूत्रीविभाजन के बाद परागकण बनता है जो वास्तव में अपरिपक्व नर गैमेटोफाइट है।
पुंकेसर (Stamens) फूल का नर प्रजनन अंग होते हैं और अंडप (carpels) मादा प्रजनन अंग के रूप में
कार्य करते हैं जो अंडे का उत्पादन करते हैं।
M.P.P.C.S. (Pre) 2017
2
Which of the following statements is/are correct regarding vegetative propagation of
plants?
1. Vegetative propagation produces clonal population.
2. Vegetative propagation helps in eliminating the virus.
3. Vegetative propagation can be practiced most of the year.
Select the correct answer using the code given below.
पौधों के वानस्पतिक प्रवर्धन (vegetative propagation) के संबंध में निम्नलिखित में से
कौन सा/से कथन सही है/हैं?
1. वानस्पतिक प्रवर्धन क्लोनल आबादी (clonal population) पैदा करता है。
2. वानस्पतिक प्रवर्धन वायरस को खत्म करने में मदद करता है。
3. वानस्पतिक प्रवर्धन वर्ष के अधिकांश समय किया जा सकता है。
नीचे दिए गए कूट का उपयोग करके सही उत्तर चुनें।
✅ Correct Answer: (C)
Vegetative or clonal propagation is an asexual reproduction in which successive mitosis of
specialized vegetative propagules (as bulbs, corms, tubers, cuttings) develop new plants
resulting in a clonal population. Therefore statement 1 is correct.
Viruses are transmitted from plant to plant in a number of ways including vegetative
propagation. Viral diseases could be transferred through vegetative parts. So statement 2 is
incorrect.
Vegetative propagation can be practised most of the year. Hence, statement 3 is correct.
वानस्पतिक या क्लोनल प्रवर्धन एक अलैंगिक प्रजनन है जिसमें विशेष वानस्पतिक प्रोपेग्यूल (जैसे
बल्ब, कंद, कटिंग) के क्रमिक समसूत्री विभाजन से नए पौधे विकसित होते हैं जिसके परिणामस्वरूप
क्लोनल आबादी उत्पन्न होती है। इसलिए कथन 1 सही है।
वायरस पौधों से पौधों में वानस्पतिक प्रवर्धन सहित कई तरीकों से फैलते हैं। वायरल रोग वानस्पतिक
भागों के माध्यम से स्थानांतरित हो सकते हैं। इसलिए कथन 2 गलत है।
वानस्पतिक प्रवर्धन वर्ष के अधिकांश समय किया जा सकता है। इसलिए, कथन 3 सही है।
I.A.S. (Pre) 2014
3
The practice of gootee in plants is used for the purpose of:
पौधों में गूटी (gootee) का अभ्यास किस उद्देश्य के लिए किया जाता है:
✅ Correct Answer: (B)
Gootee in plants is a method of vegetative propagation of plants that requires the rooting
of aerial stems when connected to the parent plant.
It is also named as air layering, marcotting, pot layerage, marcottage and circumposition.
पौधों में गूटी (Gootee) पौधों के वानस्पतिक प्रवर्धन की एक विधि है जिसके लिए मूल पौधे से
जुड़े होने पर हवाई तनों को जड़ से जोड़ने की आवश्यकता होती है।
इसे एयर लेयरिंग (air layering), मार्कोटिंग, पॉट लेयरेज, मार्कोटेज और सर्कंपोज़िशन का नाम भी
दिया गया है।
U.P. R.O./A.R.O. (Pre) 2021
4
With reference to the current trends in the cultivation of sugarcane in India,
consider the following statements:
1. A substantial saving in seed material is made when 'bud chip settlings' are raised in a nursery and
transplanted in the main field.
2. When direct planting of setts is done, the germination percentage is better with single-budded setts
as compared to setts with many buds.
3. If bad weather conditions prevail when setts are directly planted, single-budded setts have better
survival as compared to large setts.
4. Sugarcane can be cultivated using settlings prepared from tissue culture.
Which of the statements given above is/are correct?
भारत में गन्ने की खेती के वर्तमान रुझानों के संदर्भ में, निम्नलिखित कथनों पर विचार
करें:
1. जब नर्सरी में 'बड चिप सेटलिंग्स' (bud chip settlings) उगाए जाते हैं और मुख्य खेत में रोपे जाते हैं,
तो बीज सामग्री में काफी बचत होती है。
2. जब सेट (setts) की सीधी बुवाई की जाती है, तो कई कलियों वाले सेट की तुलना में सिंगल-बडेड सेट
(single-budded setts) के साथ अंकुरण प्रतिशत बेहतर होता है。
3. यदि सेट को सीधे बोते समय खराब मौसम की स्थिति बनी रहती है, तो बड़े सेट की तुलना में सिंगल-बडेड सेट के
जीवित रहने की संभावना बेहतर होती है。
4. गन्ने की खेती ऊतक संवर्धन (tissue culture) से तैयार सेटलिंग्स का उपयोग करके की जा सकती है。
उपरोक्त में से कौन सा/से कथन सही है/हैं?
✅ Correct Answer: (C)
The 'bud chip' method for cane plantation reduces the mass and enables quick multiplication
of seeds. This method has proved to be more economical and a substantial saving in seed
material is made when 'bud chip settlings' are raised in a nursery and transplanted in the
main field. Thus, Statement 1 is correct.
When direct planting of setts is done, it is found that the germination percentage is better
with many-buds setts as compared to single-budded setts. Thus, Statement 2 is incorrect.
When setts are directly planted, large setts have better survival under bad weather than
single-budded setts. Thus, Statement 3 is incorrect.
Planting material for vegetative propagation of sugarcane includes whole cane, setts having
of single buds to many buds, setts prepared in nursery or setts prepared from tissue
culture. Thus, Statement 4 is correct.
गन्ने के बागान के लिए 'बड चिप' (bud chip) विधि द्रव्यमान को कम करती है और बीजों के त्वरित
गुणन को सक्षम बनाती है। यह विधि अधिक किफायती साबित हुई है और जब 'बड चिप सेटलिंग्स' को नर्सरी
में उगाया जाता है और मुख्य खेत में रोपा जाता है तो बीज सामग्री में काफी बचत होती है। अतः कथन
1 सही है।
जब सेट (setts) की सीधी बुवाई की जाती है, तो यह पाया जाता है कि सिंगल-बडेड सेट की तुलना में
कई कलियों वाले (many-buds) सेट के साथ अंकुरण प्रतिशत बेहतर होता है। अतः कथन 2 गलत है।
जब सेट को सीधे बोया जाता है, तो सिंगल-बडेड सेट की तुलना में खराब मौसम में बड़े सेट बेहतर रूप
से जीवित रहते हैं। अतः कथन 3 गलत है।
गन्ने के वानस्पतिक प्रवर्धन के लिए रोपण सामग्री में पूरा गन्ना, एक कली से लेकर कई कलियों
वाले सेट, नर्सरी में तैयार किए गए सेट या ऊतक संवर्धन (tissue culture) से तैयार किए गए सेट
शामिल हैं। अतः कथन 4 सही है।
I.A.S. (Pre) 2020
5
Sugarcane is a:
गन्ना (Sugarcane) है एक:
✅ Correct Answer: (A)
Sugarcane plants usually bloom in winter, when days are shorter.
It is therefore a short day plant as classified by photoperiodism.
In general, sugarcane is termed an intermediate daylength plant with quantitative short-day
behavior.
गन्ने के पौधे आमतौर पर सर्दियों में खिलते हैं, जब दिन छोटे होते हैं।
इसलिए इसे दीप्तिकालिता (photoperiodism) द्वारा वर्गीकृत लघु-दिवस पौधे (short day plant) के
रूप में जाना जाता है।
सामान्य तौर पर, गन्ने को मात्रात्मक लघु-दिवस व्यवहार के साथ एक मध्यवर्ती दिन की लंबाई वाला
पौधा कहा जाता है।
Jharkhand P.C.S. (Pre) 2023
6
With reference to crop rotation, which of the following statement is/are correct?
1. Deep rooted crops should be followed by the same type of crop.
2. Legume must be followed by a non-legume.
Select the correct answer using the codes given below:
फसल चक्र (crop rotation) के संदर्भ में, निम्नलिखित में से कौन सा/से कथन सही
है/हैं?
1. गहरी जड़ वाली फसलों के बाद उसी प्रकार की फसल बोनी चाहिए。
2. फलीदार फसल (Legume) के बाद गैर-फलीदार फसल बोनी चाहिए。
नीचे दिए गए कूट का उपयोग करके सही उत्तर चुनें:
✅ Correct Answer: (B)
Crop rotation refers to the cultivation of different crops successively, in line with
changing seasons to optimize soil nutrients.
Deep rooted crops should be succeeded by shallow rooted crops to avoid depleting the same
soil depth of nutrients constantly. Thus statement 1 is incorrect.
Leguminous crops (which fix nitrogen) should be followed by non-leguminous crops to utilize
the fixed nitrogen effectively. Thus statement 2 is correct.
फसल चक्र का अर्थ है बदलती मौसम के अनुसार विभिन्न फसलों की क्रमिक खेती करना ताकि मिट्टी के
पोषक तत्वों का अनुकूलन किया जा सके।
गहरी जड़ वाली फसलों के बाद उथली जड़ वाली फसलें बोनी चाहिए ताकि मिट्टी की समान गहराई से पोषक
तत्वों की लगातार कमी से बचा जा सके। अतः कथन 1 गलत है।
फलीदार (Leguminous - जो नाइट्रोजन स्थिर करती हैं) फसलों के बाद गैर-फलीदार फसलें बोनी चाहिए
ताकि स्थिर नाइट्रोजन का प्रभावी ढंग से उपयोग किया जा सके। अतः कथन 2 सही है।
U.P. R.O./A.R.O. (Pre) 2021
7
Given below are two statements, in which one is labelled as Assertion (A) and the
other as Reason (R).
Assertion (A): Pulses, when included in intercropping with cereals, act as complimentary crops.
Reason (R): Pulses with tap root system, do not compete for nutrients and moisture with cereals having
fibrous root system.
Select the correct answer from the code given below:
नीचे दो कथन दिए गए हैं, जिनमें से एक को अभिकथन (A) और दूसरे को कारण (R) के रूप में
लेबल किया गया है।
अभिकथन (A): दालें, जब अनाज के साथ अंतरफसल (intercropping) में शामिल की जाती हैं, तो पूरक फसलों
(complimentary crops) के रूप में कार्य करती हैं।
कारण (R): मूसला जड़ प्रणाली (tap root system) वाली दालें, रेशेदार जड़ प्रणाली वाले अनाज के साथ पोषक
तत्वों और नमी के लिए प्रतिस्पर्धा नहीं करती हैं।
नीचे दिए गए कूट से सही उत्तर चुनें:
✅ Correct Answer: (C)
Intercropping is the practice of growing two or more crops in proximity. Pulses are
generally intercropped with coarse cereals and act as complementary crops. Thus, (A) is
true.
Pulses with tap root system do not compete for nutrients and moisture with cereals having
fibrous root systems since they draw from different depths. Thus, (R) is true.
However, (R) is not the *complete* or *primary* explanation of (A). The complementarity also
involves nitrogen fixation by pulses, which reduces nitrogen demand for cereals. Hence, both
(A) and (R) are true but (R) is not the correct explanation of (A).
अंतरफसल (Intercropping) निकटता में दो या दो से अधिक फसलें उगाने की प्रथा है। दालों को आम तौर
पर मोटे अनाज के साथ उगाया जाता है और ये पूरक फसलों के रूप में कार्य करती हैं। इस प्रकार, (A)
सत्य है।
मूसला जड़ प्रणाली वाली दालें रेशेदार जड़ प्रणाली वाले अनाज के साथ पोषक तत्वों और नमी के लिए
प्रतिस्पर्धा नहीं करती हैं क्योंकि वे अलग-अलग गहराई से इन्हें खींचती हैं। इस प्रकार, (R)
सत्य है।
हालाँकि, (R), (A) की *संपूर्ण* या *प्राथमिक* व्याख्या नहीं है। पूरकता में दालों द्वारा
नाइट्रोजन स्थिरीकरण भी शामिल है, जो अनाज के लिए नाइट्रोजन की मांग को कम करता है। अतः, दोनों
(A) और (R) सत्य हैं लेकिन (R), (A) का सही स्पष्टीकरण नहीं है।
U.P. R.O./A.R.O. (Pre) 2023
8
Clonal selection can be used in –
क्लोनल चयन (Clonal selection) का उपयोग किसमें किया जा सकता है –
✅ Correct Answer: (D)
The procedure of selection used for asexually propagated crops is known as clonal selection
since the selected plants are used to produce new clones.
This method is widely used in the production of crops like potatoes,
sugarcane, and bananas.
अलैंगिक रूप से प्रवर्धित (asexually propagated) फसलों के लिए उपयोग की जाने वाली चयन
प्रक्रिया को क्लोनल चयन के रूप में जाना जाता है क्योंकि चयनित पौधों का उपयोग नए क्लोन बनाने
के लिए किया जाता है।
इस पद्धति का व्यापक रूप से आलू, गन्ना और केले जैसी फसलों के उत्पादन में
उपयोग किया जाता है।
U.P.P.C.S. (Mains) 2009
9
A plant bud is –
एक पौधे की कली (bud) है –
✅ Correct Answer: (A)
In botany, a bud is an undeveloped or embryonic shoot and normally occurs
in the axil of a leaf or at the tip of the stem.
वनस्पति विज्ञान में, एक कली एक अविकसित या भ्रूणीय प्ररोह (embryonic shoot)
होती है और सामान्य रूप से पत्ती की धुरी में या तने की नोक पर होती है।
56th to 59th B.P.S.C. (Pre) 2015
10
Embryo is found in –
भ्रूण (Embryo) किसमें पाया जाता है –
✅ Correct Answer: (C)
The embryo along with other cells from the mother plant develops into the
seed for the next generation, which, after germination, grows into a new
plant.
भ्रूण, मूल पौधे (mother plant) की अन्य कोशिकाओं के साथ मिलकर अगली पीढ़ी के लिए
बीज में विकसित होता है, जो अंकुरण के बाद एक नए पौधे के रूप में बढ़ता है।
53rd to 55th B.P.S.C. (Pre) 2011
11
Match List-I with List-II and select the correct answer by using the codes given
below the lists:
List-I
List-II
A. Fruit
1. Ovule
B. Seed
2. Leaf
C. Wood
3. Stem
D. Starch
4. Ovary
सूची-I को सूची-II से सुमेलित करें और सूचियों के नीचे दिए गए कूट का उपयोग करके सही
उत्तर चुनें:
सूची-I
सूची-II
A. फल
1. बीजांड (Ovule)
B. बीज
2. पत्ती
C. लकड़ी
3. तना (Stem)
D. स्टार्च
4. अंडाशय (Ovary)
✅ Correct Answer: (B)
The correctly matched lists are as follows:
Fruit is developed from the mature – Ovary.
Seed is developed from the – Ovule.
Wood is basically the secondary xylem of a plant – Stem.
Starch is produced and stored primarily in the – Leaf.
सही सुमेलित सूचियां इस प्रकार हैं:
फल परिपक्व अंडाशय (Ovary) से विकसित होता है।
बीज बीजांड (Ovule) से विकसित होता है।
लकड़ी मूल रूप से पौधे के तने (Stem) का द्वितीयक जाइलम है।
स्टार्च का उत्पादन और भंडारण मुख्य रूप से पत्ती (Leaf) में होता है।
I.A.S. (Pre) 1998
12
Plants are formed like parent plant from –
पौधे मूल पौधे (parent plant) के समान किससे बनते हैं –
✅ Correct Answer: (B)
Plants are propagated by two methods – 1. Sexual propagation or seed propagation. 2. Asexual
or vegetative propagation.
Vegetative propagation is a form of asexual reproduction of a plant. Only one plant is
involved, and offspring is the result of one parent.
The new plant is genetically identical to the parent. In this process, a new organism arises
from any vegetative part of the parent (root, stem, leaf etc.) and possesses exactly the
same characteristics as the parent plant.
Stem cutting is a common artificial method of vegetative propagation
ensuring exact parental match.
पौधों का प्रवर्धन दो विधियों द्वारा होता है - 1. लैंगिक प्रवर्धन या बीज प्रवर्धन। 2. अलैंगिक
या वानस्पतिक प्रवर्धन।
वानस्पतिक प्रवर्धन पौधे के अलैंगिक प्रजनन का एक रूप है। इसमें केवल एक पौधा शामिल होता है और
संतान एक ही माता-पिता का परिणाम होती है।
नया पौधा आनुवंशिक रूप से माता-पिता के समान होता है। इस प्रक्रिया में, नया जीव माता-पिता के
किसी भी वानस्पतिक भाग (जड़, तना, पत्ती आदि) से उत्पन्न होता है और इसमें मूल पौधे की बिल्कुल
समान विशेषताएं होती हैं।
तने की कटाई (Stem cutting) वानस्पतिक प्रवर्धन की एक सामान्य कृत्रिम विधि है
जो सटीक माता-पिता के गुणों को सुनिश्चित करती है।
39th B.P.S.C. (Pre) 1994
13
Stem cutting is done generally to grow –
तने की कटाई (Stem cutting) आम तौर पर किसे उगाने के लिए की जाती है –
✅ Correct Answer: (B)
Sugarcane plants are predominantly propagated by stem cutting. Stem cutting
is segmented parts of the stem or entire stems detached from the main branch.
Mango and cotton are generally grown from seeds while suckers are used as the planting
material for banana.
गन्ने के पौधों को मुख्य रूप से तने की कटाई (stem cutting) द्वारा प्रवर्धित
किया जाता है। तने की कटाई तने के खंडित भाग या मुख्य शाखा से अलग किए गए पूरे तने होते हैं।
आम और कपास आम तौर पर बीजों से उगाए जाते हैं जबकि केले के लिए 'सकर्स' (suckers) का उपयोग रोपण
सामग्री के रूप में किया जाता है।
39th B.P.S.C. (Pre) 1994
14
Consider the following plants:
1. Bougainvillea
2. Carnation
3. Cocoa
4. Grapes
Which of these plants are propagated by stem cuttings?
निम्नलिखित पौधों पर विचार करें:
1. बोगनविलिया (Bougainvillea)
2. कार्नेशन (Carnation)
3. कोको (Cocoa)
4. अंगूर (Grapes)
इनमें से कौन से पौधे तने की कटाई द्वारा प्रवर्धित (propagated) होते हैं?
✅ Correct Answer: (D)
Propagation of plants by stem cuttings is the most popular plant propagation method for
woody shrubs and ornamental plants.
Some of the plants propagated by stem cuttings are Sugarcane, grapes, Rose, Cocoa,
Carnation, Duranta, Bougainvillea, etc.
Although in plants like Cocoa, propagation by seeds is also popular, stem cuttings are
widely used for cloning specific desirable varieties.
तने की कटाई द्वारा पौधों का प्रसार लकड़ी की झाड़ियों और सजावटी पौधों के लिए सबसे लोकप्रिय
पौधा प्रसार विधि है।
तने की कटिंग द्वारा प्रचारित कुछ पौधे गन्ना, अंगूर, गुलाब, कोको, कार्नेशन, दुरंता,
बोगनविलिया आदि हैं।
यद्यपि कोको जैसे पौधों में, बीज द्वारा प्रवर्धन भी लोकप्रिय है, विशिष्ट वांछनीय किस्मों की
क्लोनिंग के लिए स्टेम कटिंग का व्यापक रूप से उपयोग किया जाता है।
I.A.S. (Pre) 2002
15
Consider the following statements:
1. Sweet orange plant is propagated by grafting technique.
2. Jasmine plant is propagated by layering technique.
Which of the statement(s) given above is/are correct?
निम्नलिखित कथनों पर विचार करें:
1. मीठे संतरे के पौधे को ग्राफ्टिंग तकनीक द्वारा प्रवर्धित किया जाता है।
2. चमेली के पौधे को लेयरिंग (layering) तकनीक द्वारा प्रवर्धित किया जाता है।
ऊपर दिए गए कथनों में से कौन सा/से सही है/हैं?
✅ Correct Answer: (C)
Layering is a way to grow new plants as in the case of Jasmine. In a nutshell, burying part
of a stem or branch in the soil enables new roots and shoots to form.
Grafting or graftage is a horticultural technique whereby tissues from one plant are
inserted into those of another so that the two sets of vascular tissues may join together.
Sweet orange plant is propagated by this technique. Both statements are correct.
चमेली के मामले में लेयरिंग (Layering) नए पौधे उगाने का एक तरीका है। संक्षेप में, तने या शाखा
के एक हिस्से को मिट्टी में गाड़ने से नई जड़ें और प्ररोह (shoots) बन जाते हैं।
ग्राफ्टिंग या ग्राफ्टेज (Grafting) एक बागवानी तकनीक है जिसके तहत एक पौधे के ऊतकों को दूसरे
पौधे के ऊतकों में डाला जाता है ताकि संवहनी ऊतकों के दो सेट एक साथ जुड़ सकें। मीठे संतरे के
पौधे को इस तकनीक द्वारा प्रवर्धित किया जाता है। दोनों कथन सही हैं।
I.A.S. (Pre) 2009
16
Buds are typically found:
कलियाँ (Buds) आम तौर पर पाई जाती हैं:
✅ Correct Answer: (A)
A plant bud is an undeveloped or embryonic shoot. Buds are typically found in the axil of a
leaf (base of the leaf where leaf joins the stem) or at the tip of a stem or branch.
These are known as axillary or terminal buds, respectively. Terminal buds are responsible
for the vertical growth of the plant.
पौधे की कली (bud) एक अविकसित या भ्रूणीय प्ररोह है। कलियाँ आमतौर पर एक पत्ती की धुरी में
(पत्ती का आधार जहां पत्ती तने से जुड़ती है) या तने या शाखा के सिरे पर पाई जाती हैं।
इन्हें क्रमशः अक्षीय (axillary) या टर्मिनल (terminal) कलियों के रूप में जाना जाता है।
टर्मिनल कलियाँ पौधे की ऊर्ध्वाधर वृद्धि के लिए जिम्मेदार हैं।
70th B.P.S.C. (Pre) (Re-Exam) 2024
17
The most important part of the plant in term of its life cycle is–
जीवन चक्र के संदर्भ में पौधे का सबसे महत्वपूर्ण भाग कौन सा है–
✅ Correct Answer: (A)
The flower is the most important part of the plant in term of its life
cycle.
The biological function of a flower is to mediate the union of male and female gametes in
order to produce seeds.
The process begins with pollination followed by fertilization and continues with the
formation and dispersal of the seed.
जीवन चक्र के संदर्भ में फूल पौधे का सबसे महत्वपूर्ण अंग है।
एक फूल का जैविक कार्य बीज पैदा करने के लिए नर और मादा युग्मकों (gametes) के मिलन में
मध्यस्थता करना है।
प्रक्रिया परागण से शुरू होती है जिसके बाद निषेचन होता है और बीज के निर्माण और प्रकीर्णन के
साथ जारी रहती है।
47th B.P.S.C. (Pre) 2003
18
Which of the three circumstances among these are most necessary in the germination of
single seed plants?
एकल बीज वाले पौधों के अंकुरण में इनमें से कौन सी तीन परिस्थितियाँ सबसे आवश्यक हैं?
✅ Correct Answer: (B)
Water, proper temperature and oxygen are the most required substances/circumstances for the
germination of seed, while the sunlight is not essential.
बीज के अंकुरण के लिए पानी, उचित तापमान और ऑक्सीजन सबसे आवश्यक पदार्थ/परिस्थितियाँ हैं, जबकि
सूर्य का प्रकाश आवश्यक नहीं है।
Uttarakhand U.D.A./L.D.A. (Pre) 2003
19
Which one is not required for the germination of seed?
बीज के अंकुरण के लिए किसकी आवश्यकता नहीं होती है?
✅ Correct Answer: (A)
See the explanation of the above question. Light is generally not required
for the germination of seed.
उपरोक्त प्रश्न का स्पष्टीकरण देखें। बीज के अंकुरण के लिए आमतौर पर प्रकाश की
आवश्यकता नहीं होती है।
U.P.P.C.S. (Pre) 1990
20
Censer mechanism of dispersal of seeds is found in:
बीजों के प्रकीर्णन (dispersal) की सेंसर क्रियाविधि (Censer mechanism) किसमें पाई जाती
है:
✅ Correct Answer: (B)
Seed dispersal is the movement or transport of seeds away from the parent plant.
Censer mechanism of dispersal of seeds is found in poppy. In this
mechanism, seeds are shaken out of the capsule when it is swayed by the wind, like a censer.
बीज प्रकीर्णन मूल पौधे से दूर बीजों की गति या परिवहन है।
बीजों के प्रकीर्णन का सेंसर तंत्र खसखस (poppy) में पाया जाता है। इस तंत्र
में, हवा के झोंके से कैप्सूल हिलने पर बीज उसमें से बाहर गिर जाते हैं, ठीक एक सेंसर (धूपदानी)
की तरह।
U.P.P.C.S. (Mains) 2010
21
Transfer of pollen grains from the anther to stigma of another flower of the same
plant is called
परागकणों का परागकोश (anther) से उसी पौधे के दूसरे फूल के वर्तिकाग्र (stigma) तक
स्थानांतरण क्या कहलाता है?
✅ Correct Answer: (B)
Transfer of pollen grains from the anther to stigma of another flower of the same plant is
called geitonogamy.
It is functionally a type of cross-pollination (involving a pollinating agent) but
genetically similar to autogamy (self-pollination) since the pollen grains come from the
same plant.
परागकणों का परागकोश से उसी पौधे के दूसरे फूल के वर्तिकाग्र तक स्थानांतरण
गिटोनोगैमी कहलाता है।
यह कार्यात्मक रूप से एक प्रकार का क्रॉस-परागण (एक परागण एजेंट को शामिल करना) है लेकिन
आनुवंशिक रूप से ऑटोगैमी (स्व-परागण) के समान है क्योंकि परागकण एक ही पौधे से आते हैं।
M.P.P.C.S. (Pre) 2019
22
Consider the following kinds organisms –
1. Bat
2. Bee
3. Bird
Which of the above is/are pollinating agent/agents?
निम्नलिखित जीवों पर विचार करें –
1. चमगादड़
2. मधुमक्खी
3. पक्षी
उपरोक्त में से कौन परागणकर्ता (pollinating agent) हैं?
✅ Correct Answer: (D)
Pollination is the act of transferring pollen grains from male anther of a flower to the
female stigma. It is a prerequisite for fertilization.
Bees are the most important pollinating agent. Pollination by bees and
butterflies often occurs in the flowers which bloom in the day time.
Birds (like Hummingbirds) pollinate flowers that appear in warm colours
like red, yellow and orange.
Bat is also a pollinating agent of many flowers. Some bat-pollinated
flowers are found in the southern hemisphere.
परागण फूल के नर परागकोश से मादा वर्तिकाग्र में परागकणों को स्थानांतरित करने की क्रिया है। यह
निषेचन के लिए एक शर्त है।
मधुमक्खियां सबसे महत्वपूर्ण परागणकर्ता हैं। मधुमक्खियों और तितलियों द्वारा
परागण अक्सर दिन के समय खिलने वाले फूलों में होता है।
पक्षी (जैसे हमिंगबर्ड) लाल, पीले और नारंगी जैसे गर्म रंगों में दिखाई देने
वाले फूलों को परागित करते हैं।
चमगादड़ भी कई फूलों का परागणकर्ता है। कुछ चमगादड़-परागित फूल दक्षिणी
गोलार्ध में पाए जाते हैं। इसलिए, तीनों सही हैं।
I.A.S. (Pre) 2012
23
Pollination is best defined as:
परागण (Pollination) को सर्वोत्तम रूप से परिभाषित किया गया है:
✅ Correct Answer: (A)
See the explanation of above question. Pollination is the transfer of pollen grains from the
male anther to the female stigma of a flower.
उपरोक्त प्रश्न का स्पष्टीकरण देखें। परागण एक फूल के नर परागकोश से मादा वर्तिकाग्र में
परागकणों का स्थानांतरण है।
67th B.P.S.C. (Pre) (Re. Exam) 2022
24
Seed that is changed every year is known as -
वह बीज जिसे हर वर्ष बदला जाता है, कहलाता है -
✅ Correct Answer: (D)
Hybrid seed is changed every year because the benefits of heterosis (hybrid
vigor) are greatest in the first generation (F1). If farmers save and replant seeds from
hybrids, the next generation will segregate and not maintain the high yields.
In agriculture and gardening, hybrid seed is seed produced by cross-pollinated plants.
Hybrid seed production is predominant in agriculture and home gardening.
संकर बीज (Hybrid seed) हर साल बदल दिया जाता है क्योंकि हेटेरोसिस (संकर ओज)
के लाभ पहली पीढ़ी (F1) में सबसे अधिक होते हैं। यदि किसान संकर बीजों को बचाकर दोबारा बोते
हैं, तो अगली पीढ़ी अलग हो जाएगी और उच्च उपज बरकरार नहीं रख पाएगी।
कृषि और बागवानी में, संकर बीज क्रॉस-परागण वाले पौधों द्वारा उत्पादित बीज होते हैं। कृषि और
गृह बागवानी में संकर बीज उत्पादन प्रमुख है।
U.P.P.C.S. (Mains) 2010
25
Consider the following events of seed multiplication stages and arrange these in
correct chronological order from earliest stage to last.
I. Breeder seed
II. Foundation seed
III. Certified seed
IV. Nucleus seed
Select the correct answer from the code given below:
बीज गुणन (seed multiplication) चरणों की निम्नलिखित घटनाओं पर विचार करें और इन्हें
प्रारंभिक चरण से अंतिम चरण तक सही कालानुक्रमिक क्रम में व्यवस्थित करें।
I. प्रजनक बीज (Breeder seed)
II. आधार बीज (Foundation seed)
III. प्रमाणित बीज (Certified seed)
IV. न्यूक्लियस बीज (Nucleus seed)
नीचे दिए गए कूट से सही उत्तर चुनें:
✅ Correct Answer: (D)
The correct chronological order of events of seed multiplication stages from earliest stage
to last, is as follows:
Nucleus seed (IV) → Breeder seed (I) → Foundation seed (II) → Certified seed
(III).
Hence, option (d) is the correct answer.
प्रारंभिक चरण से अंतिम चरण तक बीज गुणन चरणों की घटनाओं का सही कालानुक्रमिक क्रम इस प्रकार
है:
न्यूक्लियस बीज (IV) → प्रजनक बीज (I) → आधार बीज (II) → प्रमाणित बीज (III)।
अतः विकल्प (d) सही उत्तर है।
U.P. R.O./A.R.O. (Pre) 2023
26
In a bisexual flower, if androecium and gynoecium mature at different times, the
phenomenon is known as:
एक द्विलिंगी फूल में, यदि पुमंग (androecium) और जायांग (gynoecium) अलग-अलग समय पर
परिपक्व होते हैं, तो इस घटना को किस रूप में जाना जाता है:
✅ Correct Answer: (A)
In a bisexual flower, if androecium (male part) and gynoecium (female part) mature at
different times, the phenomenon is known as dichogamy. This prevents
self-pollination.
It is of two types: (1) Protandry (2) Protogyny.
Protogyny is a condition of a flower in which female parts mature before the male ones,
while protandry is the condition in which the male part of the flower matures before the
female ones.
एक द्विलिंगी फूल में, यदि पुमंग (नर भाग) और जायांग (मादा भाग) अलग-अलग समय पर परिपक्व होते
हैं तो इस घटना को डाइकोगैमी (भिन्नकालपक्वता) के रूप में जाना जाता है। यह
स्व-परागण को रोकता है।
यह दो प्रकार का होता है: (1) पुंपूर्वता (Protandry) (2) स्त्रीपूर्वता (Protogyny)।
स्त्रीपूर्वता फूल की वह स्थिति है जिसमें मादा अंग नर अंगों से पहले परिपक्व हो जाते हैं, जबकि
पुंपूर्वता वह स्थिति है जिसमें फूल का नर अंग मादा अंगों से पहले परिपक्व हो जाता है।
I.A.S. (Pre) 2002
27
Which of the following genomic conditions is found in commercial edible wheat?
वाणिज्यिक खाद्य गेहूं में निम्नलिखित में से कौन सी जीनोमिक स्थिति (genomic condition)
पाई जाती है?
✅ Correct Answer: (D)
ABD genome (AABBDD) is found in commercial edible wheat (i.e., Bread wheat;
Triticum aestivum).
It is an allohexaploid species, resulting from the hybridization of three different diploid
grass species that contributed the A, B, and D genomes.
वाणिज्यिक खाद्य गेहूं (अर्थात, ब्रेड गेहूं; ट्रिटिकम एस्टिवम) में एबीडी जीनोम (ABD
genome) (AABBDD) पाया जाता है।
यह एक एलोहेक्साप्लोइड प्रजाति है, जो तीन अलग-अलग द्विगुणित (diploid) घास प्रजातियों के संकरण
के परिणामस्वरूप उत्पन्न हुई है जिन्होंने A, B और D जीनोम का योगदान दिया।
Jharkhand P.C.S. (Pre) 2023
28
How many chromosomes are found in the endosperm of maize?
मक्के के भ्रूणपोष (endosperm) में कितने गुणसूत्र पाए जाते हैं?
✅ Correct Answer: (B)
In maize, the meiocyte (diploid cell) contains 20 chromosomes (2n=20) and the gamete has 10
chromosomes (n=10).
The endosperm in angiosperms like maize is formed by triple fusion and is therefore triploid
(3n).
Hence, the number of chromosomes in the endosperm (triploid tissue that nourishes embryo) of
maize is 3 × 10 = 30.
मक्के में, मियोसाइट (द्विगुणित कोशिका) में 20 गुणसूत्र (2n=20) होते हैं और युग्मक (gamete)
में 10 गुणसूत्र (n=10) होते हैं।
मक्के जैसे एंजियोस्पर्म में भ्रूणपोष ट्रिपल फ्यूजन द्वारा बनता है और इसलिए यह त्रिगुणित
(triploid - 3n) होता है।
इसलिए, मक्के के भ्रूणपोष (त्रिगुणित ऊतक जो भ्रूण को पोषण देता है) में गुणसूत्रों की संख्या 3
× 10 = 30 है।
Jharkhand P.C.S. (Pre) 2023
29
Which component of plants receives stimulus for flowering?
पौधों का कौन सा घटक फूल आने के लिए उत्तेजना (stimulus) प्राप्त करता है?
✅ Correct Answer: (C)
The stimulus for flowering which are light, energy and carbon dioxide are received by the
leaves of a plant.
The leaves are the sites of food production for the flowering plant.
Apart from this, florigen, the flowering hormone or stimulus is also produced in leaves and
transported to the shoot apex.
प्रकाश, ऊर्जा और कार्बन डाइऑक्साइड जो फूल आने के लिए उत्तेजना हैं, पौधे की
पत्तियों द्वारा प्राप्त किए जाते हैं।
पत्तियाँ फूल वाले पौधे के लिए भोजन उत्पादन के स्थल हैं।
इसके अलावा, फ्लोरिजेन (florigen), जो कि फूल आने वाला हार्मोन या उत्तेजक है, वह भी पत्तियों
में उत्पन्न होता है और प्ररोह शीर्ष (shoot apex) तक पहुँचाया जाता है।